jtpolaris Active member Lifetime Membership Nov 26, 2007 206 37 28 ND www.dirtracing17.com Dec 5, 2012 #1 Would anyone happen to have the dimensions or a solid model for a Polaris clutch holding tool? Thanks
Would anyone happen to have the dimensions or a solid model for a Polaris clutch holding tool? Thanks
R rotax Free Member Dec 3, 2001 2,056 231 63 CO Dec 9, 2012 #2 A long 3/8" or larger extension..or put a few together. Got the job done..but I'm no pro. But I guess you'd know that already with your sled history, so you must want something a bit more proper.
A long 3/8" or larger extension..or put a few together. Got the job done..but I'm no pro. But I guess you'd know that already with your sled history, so you must want something a bit more proper.
S Snowbird11 Well-known member Lifetime Membership May 29, 2011 691 202 43 44 SLC/Samak, Ut Dec 11, 2012 #3 for pulling the spider or just to take off the primary from the crank? i've used a pipe, strap wrench and 6' of webbing to hold it for taking off the machine. all work well for me.
for pulling the spider or just to take off the primary from the crank? i've used a pipe, strap wrench and 6' of webbing to hold it for taking off the machine. all work well for me.