W
I have a 2010 m8 and put on a new dayco XTX 5032 belt and it drags to the point of stalling the sled if I apply the brake.
I have tried shimming the secondary to no success and measured the belt and it is perfect on sizing 46 Inches long by 1.45 wide.
Is it the the belt is too sicky or too tight?
I have tried shimming the secondary to no success and measured the belt and it is perfect on sizing 46 Inches long by 1.45 wide.
Is it the the belt is too sicky or too tight?
Last edited:
