Sled: Polaris

Polaris related topics

Sled Pro Clutch Tool Compatibility

Last post 12-04-2008 8:18 AM by RogerBzXCR. 1 replies.

Rate:

Sort Posts:

Previous Next

Page 1 of 1 (2 items)

12-01-2008 3:52 PM

PolarcatJimmy

Joined on 11-07-2005

Posts 813

Sled Pro Clutch Tool Compatibility

Contact

Sled : 2000 XCR With Micro Three Tower

Has anyone been through getting this tool to work with this set up? The Pins will not fit past Rear sheath . P85 is 7-7/8" & the micro is 8". Also the Pins are supposed to end up flush with rear of sheath upon alignment but it seems to be way off almost like the Belmont is Wider @ the top Rear sheath area. I would need a Stock P85 Spec @ the flat area @ top of Rear Sheath to Cross over Spec.Anyone?

Jimmy

"NY Outlaws"

12-04-2008 8:18 AM

In reply to

RogerBzXCR

Joined on 07-28-2005

Tewksbury Ma..

Posts 583

Re: Sled Pro Clutch Tool Compatibility

Contact

Jimmy.. I am workin Sleds tonight I'll call ya later! around 6:00

http://www.rtb2.com/RogerBzXCR/edge-xcr/

2000 XCR 800 Flannery Prep'd HTG Heads HTG Pipes Stock Can Shockwave 1.25 x 121 w/192 1.325 Ctr mounted Mega-Bites with Double Diggers

2002 Edge-XCR Flannery XCR 800 Mill HTG Pipes Stock Can, Ripsaw 136 x 1.25
w/ 108 1.450 Woody's mega-Bites Ctr Mounted with Double Diggers

FARC Member #1
-Roger