Ask the experts
On call after-market experts from Hauck Powersports, Speedwerx, Straightline Performance, and G&G Powersports answer your questions.
Last post 11-12-2008 4:31 PM by blueracer17. 2 replies.
|
Rate:
Sort Posts:
|
blueracer17
Joined on
11-11-2008
|
clutching recommendation with TEAM secondary
I have an 03' MXZ600 REV with the following: SPI head, can and pipe. Boyeson Rage cages and the TEAM secondary. I am running a 1.25 BRP track with 96 studs down the middle. I am a hard trail rider and would like to get the most out of this setup. I weigh 175lbs. Can somebody point me in the right direction as far as primary and secondary setups? I bought the sled late last season and didn't get a chance to play with it much, seemed like there was more to be had in the clutching. I have a stock skidoo secondary as well that I could play with. If you can give me the rating/color/brand for any springs, that would be great.
Thanks,
Eric
|
|
dyna-tek racing
Joined on
07-28-2005
|
Re: clutching recommendation with TEAM secondary
in the team
54-44-46 er
160-240 spring blk/prpl
in the primary
18 grms
200-340 spring
stock arms and ramps.
minus one tooth on the top sprocket
master mechanic-outboard,sterndrive,pwc,snowmobile.
dynamometer facility
crank repair -cylinder repair-trail and race motors-shock service
clutch machining and balancing.
complete racer support- free technical support-racer discount programs
Todd Guthrie 1-260-316-2839 or www.caseyscove.com click on dyna-tek
|
|
blueracer17
Joined on
11-11-2008
|
Re: clutching recommendation with TEAM secondary
Thank you very much!!
I am close to that already
54-46-46 er
160-260 blk/wht spring secondary spring
Primary I am unsure but I think 17.8 grms,
stock primary spring
stock gearing
SPI stock profile ramps with stock arms
I will get a new primary spring for sure and see how it goes from there. I suppose a top gear is easy, haven't filled the chaincase with oil yet after cleaining it this summer.
|
|