Ask the experts
On call after-market experts from Hauck Powersports, Speedwerx, Straightline Performance, and G&G Powersports answer your questions.
|
|
Rate:
Sort Posts:
|
modman95
Joined on
10-31-2008
|
I have a 95 mach z with a Russ lemke 990. It has 40mm lectrons rle pipes and can dsa clutches with heel clicker arms 50 helik with beige spring 27-38 gears 136" track with a wahl susp. Sled runs pretty well 124 in the 1/4 but think it could be better. Getting ready to switch it over to the ice. Any ideas like 10 tooth drivers or crankshop pipes that I was think about putting on. Any help would be appreciated.
|
|
dyna-tek racing
Joined on
07-28-2005
|
IT WILL BE CLOSE TO IMPOSSIBLE TO GET 10 TOOTH DRIVERS IN THAT CHASSIS,
PX ramps
pink pink spring
17 gram pins
standard arms
47 helix at 25pds beije spring
23 -44 gears.
master mechanic-outboard,sterndrive,pwc,snowmobile.
dynamometer facility
crank repair -cylinder repair-trail and race motors-shock service
clutch machining and balancing.
complete racer support- free technical support-racer discount programs
Todd Guthrie 1-260-316-2839 or www.caseyscove.com click on dyna-tek
|
|