SHOP TALK / Ski-Doo
Ski-Doo Tech Specific Topics
Last post 11-27-2007 2:35 AM by cless. 2 replies.
|
Rate:
Sort Posts:
|
mayor
Joined on
12-06-2006
|
top end on 07-800 Gade 136
looking for some answers on what the topend should be , gets to 90 and then it is a dog 200 miles on so far any answers would be great.
|
|
ripriley
Joined on
06-18-2007
|
Re: top end on 07-800 Gade 136
Make sure Ski-Doo flashed the new mapping codes for the ECM on it. I bought a new '06 800 Renegade late last year and found out there was a new jet for the carb (about $30) I had the dealer install it because they had to re-map the ECM and I got one more ride in and what a difference it made. My top end is about $108. Remember the sled is not broke it yet and it's probably running rich. Good luck!!
|
|
cless
Joined on
12-17-2005
|
Re: top end on 07-800 Gade 136
All Ski-Doo sleds have a 10 hour break-in-peroid built in the ECM's. This will prevent harsh use for the first 10 hours. Check your gauge to see how many hours you have on it? They should run much better after. You got to remember also the Gades are geared lowered then the short track models and with the 1 1/4 inch track this will keep them a little slower on the top in.
|
|