Re: top end on 07-800 Gade 136

American Snowmobiler magazine forum is FREE to browse. LOGIN | REGISTER with the American Snowmobiler magazine Web site.

Welcome to AMSNOW.com Forums

SHOP TALK / Ski-Doo

Started by mayor at 12-07-2006 9:35 AM. Topic has 2 replies.

Sort Posts:

12-07-2006, 9:35 AM

mayor

Joined on 12-06-2006
Posts 6

top end on 07-800 Gade 136

	looking for some answers on what the topend should be , gets to 90 and then it is a dog 200 miles on so far any answers would be great.
			Report Abuse

10-12-2007, 12:09 PM

ripriley

Joined on 06-19-2007
Posts 4

Re: top end on 07-800 Gade 136

	Make sure Ski-Doo flashed the new mapping codes for the ECM on it. I bought a new '06 800 Renegade late last year and found out there was a new jet for the carb (about $30) I had the dealer install it because they had to re-map the ECM and I got one more ride in and what a difference it made. My top end is about $108. Remember the sled is not broke it yet and it's probably running rich. Good luck!!
			Report Abuse

11-27-2007, 2:35 AM

cless

Joined on 12-17-2005
Posts 10

Re: top end on 07-800 Gade 136

	All Ski-Doo sleds have a 10 hour break-in-peroid built in the ECM's. This will prevent harsh use for the first 10 hours. Check your gauge to see how many hours you have on it? They should run much better after. You got to remember also the Gades are geared lowered then the short track models and with the 1 1/4 inch track this will keep them a little slower on the top in.
			Report Abuse

Forum Jump: